[No] Front-Panel-Security Diagnostic-Reset; Front-Panel-Security Diagnostic-Reset Clear-Button - HP Aruba JL253A Management And Configuration Manual

Syntax
front-panel-security diagnostic-reset <CLEAR-BUTTON | SERIAL-CONSOLE>
Description
Enables the diagnostic reset so that the switch can capture diagnostic data.
• To initiate diagnostic reset via the clear button, press the clear button for at least 30 seconds but not more than
40 seconds.
• To initiate diagnostic switch reset via the serial console, enter the diagnostic reset sequence on the serial
console.
Options
Clear button
Enables the diagnostics by choosing the clear button option.
Serial console
Enables the diagnostics by choosing the serial console option.

[no] front-panel-security diagnostic-reset

From the configure context:
Syntax
[no] front-panel-security diagnostic-reset
Description
Disables the diagnostic reset feature so that the user is prevented from capturing diagnostic data and performing
a diagnostic reset on the switch. Both the sub-options reset-via-serial-console and reset-via-clear-
button will be disabled. This is necessary if the switch becomes unresponsive (hangs) for unknown reasons.
No front-panel-security diagnostic-reset
no front-panel-security diagnostic-reset
Clear Password
Reset-on-clear
Factory Reset
Password Recovery
Diagnostic Reset
CAUTION:
Disabling the diagnostic reset prevents the switch from capturing diagnostic data on those rare
events where the switch becomes unresponsive to user input because of unknown reasons. Ensure
that you are familiar with the front panel security options before proceeding.

Front-panel-security diagnostic-reset clear-button

From the configure context:
580
- Enabled
- Disabled
- Enabled
- Enabled
- Disabled
Aruba 2930F / 2930M Management and Configuration Guide
for ArubaOS-Switch 16.08