HP Aruba JL253A Management And Configuration Manual page 700

3 b05ada-972200 Aruba JL254A 2930F-48G-4SFP+ Switch
4 b05ada-96f080 Aruba JL259A 2930F-24G-4SFP Switch
6. All switches can be now interconnected and powered on. Connect all the switches as shown:
Procedure
1. After the connections have been made, power on switch 2 and 4. These switches will boot up normally as a
standalone switch with the default configuration.
2. The VSF enabled switch will push down the VSF configuration information to the other switches over the VSF
link ports.
3. Since switches 2 and 4 are the directly connected switches, they will receive their configuration first, and
reboot. This procedure takes between 30 seconds to 1 minute.
4. Once switches 2 & 4 have joined the stack, power on switch 3.
5. VSF configuration will be pushed to switch 3. It will reboot last, and join the stack. The final stack configuration
will now include all switches.
Switch# show vsf
VSF Domain ID
MAC Address
VSF Topology
VSF Status
Uptime
VSF MAD
VSF Port Speed
Software Version : WC.16.03.0000x
Mbr
ID MAC Address
--- ------------- -------------------------------------- --- ---------------
*1 b05ada-961100 Aruba JL253A 2930F-24G-4SFP+ Switch
2 b05ada-9721c0 Aruba JL260A 2930F-48G-4SFP Switch
3 b05ada-972200 Aruba JL254A 2930F-48G-4SFP+ Switch
4 b05ada-96f080 Aruba JL259A 2930F-24G-4SFP Switch
700
1
23
22
46
4
47
: 3144
: b05ada-961103
: Ring
: Active
: 0d 3h 22m
: None
: 1G
Model
Aruba 2930F / 2930M Management and Configuration Guide
2
23
22
46
3
47
128 Provisioned
128 Provisioned
Pri Status
200 Commander
150 Standby
128 Member
128 Member
for ArubaOS-Switch 16.08