Chapter 14 Job Scheduler; Job Scheduler; Commands; Job At | Delay | Enable | Disable - HP Aruba JL253A Management And Configuration Manual

For arubaos-switch 16.08

Table of Contents

The Job Scheduler feature enables the user to schedule commands or jobs on the switch for one time or multiple

times. This is similar in concept to the UNIX 'cron' utility. The user can schedule any CLI command that the user

would otherwise enter interactively. This includes commands to enable or disable ports, LEDs, and Power-Over-

Ethernet. Jobs can also be scheduled to be triggered by certain pre-defined events such as switch reboot. The

only major restriction on commands scheduled is that, it should not prompt/ask for any user inputs.

Set schedule jobs using the options and set the count for the number of times the job is repeated.

job JOB NAME at | delay | enable | disable

Schedule a command to run automatically. Jobs can be scheduled to run once, multiple times on a recurring

basis, or after certain events such as reboots. All commands run with manager privilege in configuration context.

The [no] form of the command deletes a scheduled job.

By default, jobs will be repeated an infinite number of times.

Restrictions

Jobs scheduled at any event will not be counted.

Jobs that are scheduled at the event "reboot" will not work in some multi management switches.

<1-1000>: is the value range for the count option.

([[DD:]HH:]MM): is the format used for the specific delay.

Specify the number of times the job should run.

Specify the delay before running the job.

Enable a job that is disabled or expired.

Disable a job. By default, a job is enabled.

Chapter 14 Job Scheduler

Job Scheduler