HP Aruba JL253A Management And Configuration Manual page 561

force
Forces a reboot if configuration in restored configuration requires a reboot. Applies the configuration with
reboot if the configuration has reboot required commands or system-wide change commands. After a forced
reboot, the name of the configuration changes.
non-blocking
Configuration restoration in non-blocking mode, where actual process happens in the background.
recovery-mode
Enables or disables recovery-mode. Recovery-mode is enabled by default and this retains the current running
configuration if configuration restoration fails.
verbose
Provides the details of configuration restore status and the list of commands to be added or deleted.
Usage
•
cfg-restore flash <FILE-NAME> [non-blocking | diff | force | recovery-mode{enable
| disable}]] | [verbose [force | [recovery-mode{enable | disable}] | [diff |
force]
•
cfg-restore tftp {<IPV4-ADDR> | <IPV6-ADDR> | <HOSTNAME-STR> <FILE-NAME> [non-
blocking | diff | force | recovery-mode{enable | disable}]] | [verbose [force |
[recovery-mode{enable | disable}]] | [diff |force]
•
cfg-restore sftp {<IPV4-ADDR> | <IPV6-ADDR> | <HOSTNAME-STR> | user <name> {<IP-
ADDRESS|IPV6-ADDRESS|HOSTNAME-STR>} | <USERNAME@>{<HOST-NAME> | <IPV4-ADDR> |
<IPV6-ADDR>}} [port <1-65535>] <FILE-NAME> [non-blocking | diff | force |
recovery-mode{enable | disable}]] | [verbose [force | [recovery-mode{enable |
disable}]] | [diff |force]
Examples
switch# cfg-restore
flash
sftp
tftp
switch# cfg-restore flash
FILE-NAME
switch# cfg-restore flash config_file
diff
force
non-blocking
recovery-mode
verbose
switch# cfg-restore tftp
HOSTNAME-STR
IP-ADDR
IPV6-ADDR
switch# cfg-restore tftp 10.100.0.12
FILE-NAME
switch# cfg-restore tftp 10.100.0.12 config_file
diff
force
Chapter 15 Configuration backup and restore without reboot
Copy file from flash.
Copy file from SFTP Server.
Copy file from TFTP Server.
Name of the backup configuration file to restore into the running
configuration.
Provide the list of changes that will be applied on the
running configuration.
Apply the configuration with reboot if the
configuration has reboot required commands or
system-wide change commands present.
Config restoration in non-blocking mode.
To enable/disable recovery-mode.
Provide the details of config restore status and the list of commands to be added
or deleted.
Specify hostname of TFTP Server.
IP Address of the TFTP Server.
IPV6 Address of the TFTP Server.
Name of the backup configuration file to restore into the running
configuration.
Provide the list of changes that will be applied on the
running configuration.
Apply the configuration with reboot if the
configuration has reboot required commands or
561