Cfg-Restore Verbose - HP Aruba JL253A Management And Configuration Manual

ip routing
snmp-server community "public" unrestricted
vlan 1
name "DEFAULT_VLAN"
untagged 1-28
ip address dhcp-bootp
exit
vlan 100
name "VLAN100"
no ip address
exit

cfg-restore verbose

Syntax
cfg-restore {flash | tftp | sftp} <FILE-NAME> verbose
Description
Provides the details of configuration restore status and the list of commands to be added or deleted along with
cfg-restore.
Command context
config
Examples
switch(config)# cfg-restore flash config verbose
Current running-configuration will be replaced with 'config'.
Continue (y/n)? y
Configuration restore is in progress, configuration changes are temporarily disabled.
Configuration Restore Information:
Status
Config File Name
Source
Time Taken
Last Run
Recovery Mode
Failure Reason
Number of Add Commands
Number of Remove Commands : 12
Time Taken for Each Phase :
Calculating diff
Adding commands
Removing commands
Configuration delete list:
vlan 2
name "VLAN2"
no ip address
exit
vlan 3
name "VLAN3"
no ip address
566
: Success
: config
: Flash
: 6 Seconds
: Tue Nov 7 03:43:07 2017
: Enabled
: -
: 0
: 2 Seconds
: 0 Seconds
: 0 Seconds
Aruba 2930F / 2930M Management and Configuration Guide
for ArubaOS-Switch 16.08