Cpe Configuration; Cpe Password Configuration; When Encrypt-Credentials Is On; When Encrypt-Credentials Is Off - HP Aruba JL253A Management And Configuration Manual

CPE configuration

Syntax:
cwmp cpe
password
Configure the password used for authentication when the ACS connects to the switch.
username
Configure the username used for authentication when the ACS connects to the switch.

CPE password configuration

When encrypt-credentials is on

Syntax:
cwmp cpe password
encrypted-key
An encrypted password generated with the 'encrypt-credentials' command.
plaintext
Configure the password used for authentication when the ACS connects to the switch.
Syntax:
cwmp cpe password encrypted-key
ASCII-STR
Enter an ASCII string (maximum length: 384 characters).

When encrypt-credentials is off

Syntax:
cwmp cpe [password]
plaintext
Configure the password used for authentication when the ACS connects to the switch
Syntax:
cwmp cpe
PASSWORD-STR
A plaintext password used for ACS authentication (maximum length: 256 characters).

CPE username configuration

Syntax:
cwmp cpe [username]
Appendix B Remote Device Deployment (TR-069) 759