Event Log Messages - HP Aruba JL253A Management And Configuration Manual

Event log messages

Cause
Event
RMON_AUTH_TWO_FACTOR_AUTHEN_STATUS
RMON_SSH_KEY_TWO_FACTOR_EN
RMON_SSH_TWO_FACTOR_AUTH_FAIL
When NTP client enabled.
When NTP client disabled.
62
Message
W 01/01/15 18:24:03 03397: auth: %s.
Examples:
W 01/01/15 18:24:03 03397: auth: Public key and
username/password should be configured for the
successful two-factor authentication.
W 01/01/15 18:24:03 03397: auth: Username and
password should be configured for the successful
two-factor authentication.
W 01/01/15 18:24:03 03397: auth: Public key should
be configured for the successful two-factor
authentication.
I 01/01/15 18:24:03 03397: auth: The validation of
certificate of SSH user 'user1' is successful.
W 01/01/15 18:24:03 03399: ssh: %s.
Examples:
W 01/01/15 18:24:03 03399: ssh: The client public
keys without username will not be considered for the
two-factor authentication for SSH session.
W 01/01/15 18:24:03 03399: ssh: The privilege level
for the user with the SSH key conflicts with the user
configured.
W 01/01/15 18:24:03 03398: ssh: %s.
Examples:
W 01/01/15 18:24:03 03398: ssh: The two-factor
authentication for SSH session failed due to the
failure in public key authentication.
W 01/01/15 18:24:03 03398: ssh: The two-factor
authentication for SSH session failed due to the
failure in username/password authentication.
W 01/01/15 18:24:03 03398: ssh: The two-factor
authentication for SSH session failed due to the
failure in validating the client certificate.
W 01/01/15 18:24:03 03398: ssh: The two-factor
authentication for SSH session failed as "ssh-server"
certificate is not installed.
NTP client is enabled.
NTP client is disabled.
Aruba 2930F / 2930M Management and Configuration Guide
Table Continued
for ArubaOS-Switch 16.08