Viewing Switch Information Available For Outbound Advertisements - HP Aruba JL253A Management And Configuration Manual

A civic address configuration
switch(config)# lldp config 2 medportlocation civic-addr US 2 1 CA 3
Widgitville 6 Main 19 1433 26 Suite_4—N 27 4 28 N4—3
switch(config)# show lldp config 2
LLDP Port Configuration Detail
Port : A2
AdminStatus [Tx_Rx] : Tx_Rx
NotificationEnabled [False] : False
Med Topology Trap Enabled [False] : False
Country Name
What
Ca-Type
Ca-Length
Ca-Value
Ca-Type
Ca-Length
Ca-Value
Ca-Type
Ca-Length
Ca-Value
Ca-Type
Ca-Length
Ca-Value
Ca-Type
Ca-Length
Ca-Value
Ca-Type
Ca-Length
Ca-Value
Ca-Type
Ca-Length
Ca-Value

Viewing switch information available for outbound advertisements

Syntax:
show lldp info local-device [port-list]
Without the [port-list] option, displays the global switch information and the per-port information currently
available for populating outbound LLDP advertisements.
With the [port-list] option, displays only the following port-specific information that is currently available for
outbound LLDP advertisements on the specified ports:
•
PortType
•
PortId
•
PortDesc
NOTE: This command displays the information available on the switch. Use the lldp config
<port-list> command to change the selection of information that is included in actual outbound
advertisements. In the default LLDP configuration, all information displayed by this command is
transmitted in outbound advertisements.
In the default configuration, the switch information currently available for outbound LLDP advertisements appears
similar to the display in the following example.
242
: US
: 2
: 1
: 2
: CA
: 3
: 11
: Widgitville
: 6
: 4
: Main
: 19
: 4
: 1433
: 26
: 9
: Suite_4-N
: 27
: 1
: 4
: 28
: 4
: N4-3
Aruba 2930F / 2930M Management and Configuration Guide
for ArubaOS-Switch 16.08