Debug Ztp; Error Reason Log For Activate Provision - HP Aruba JL253A Management And Configuration Manual

Preprocessor Directive
21 CLOUD_HTTP_ACCEPT_KEY_MISSNG_IN_RESP
22 CLOUD_HTTP_MISMATCH_ACCEPT_KEY
23 CLOUD_URL_NOT_REACHABLE_VIA_PXY

debug ztp

Syntax
debug ztp
no debug ztp
Description
Enables or disables ZTP debug logging.
Parameters and options
ztp
Zero Touch Provisioning.
no
The no debug ztp command disables ZTP debug logging.

Error Reason log for Activate Provision

Error Reason field is added in the switch firmware as part of Aruba Central Onboarding Feature from 16.07. Error
reason log helps in debugging switch firmware for central connectivity failure.
Following table shows the list of error reasons.
Preprocessor Directive
ACTIVATE_RESP_FAIL_CODE
ACTIVATE_CURL_FAIL_CODE
ACTIVATE_FAIL_PROV_NO_DEVICE_ENTRY
ACTIVATE_NON_TPM_CODE_MISSING
334
Mocana Error
Enum
Error Reason
Activate provision fails because of invalid response
received from server with status code: %s.
Device fails to reach Activate server with error: %s.
Device is not registered with Activate server.
EST provision with activate server fails because of
invalid response received from Activate server.
Aruba 2930F / 2930M Management and Configuration Guide
Error Reason
Internal error:
Missing Sec-
WebSocket-Accept
in HTTP response.
Contact Aruba
support.
Internal error:
Mismatch Sec-
WebSocket-Accept
in HTTP response.
Contact Aruba
support.
Central server is not
reachable through
proxy.
for ArubaOS-Switch 16.08