Dhcpv4 Configuration Commands; Dhcpv4 Server; Dhcp-Server; Dhcp Address Pool Name - HP Aruba JL253A Management And Configuration Manual

Table 25: Authoritative and non-authoritative pools
Authoritative Pool
When a For Own IP For IP
DHCP client
sending..
DHCP send ACK
INFORM
DHCP send ACK
REQUEST

DHCPv4 configuration commands

DHCPv4 server

dhcp-server

Syntax
[no] dhcp-server [enable | disable]
Description
Use this command to nable/disable the DHCPv4 server in a switch. Defaults to disabled.
Parameters and options
no
Removes all DHCPv4 server configurations.
enable
Enables the DHCPv4 server on the device. The no form of this command
disable
Disables the DHCPv4 server on the device.

DHCP address pool name

dhcp-server pool

Syntax
[no] dhcp-server pool <POOL-NAME>
Description
Configure the DHCPv4 server IP address pool with either a static IP or a network IP range.
Parameters and options
Chapter 8 DHCPv4 server
Unknown IP
belonging to falling outside
different the range
client
send ACK send ACK
send NACK send NACK
Non-authoritative pool
For Own IP For IP belonging to
different client
DROP DROP
send ACK DROP
Unknown IP
falling outside
the range
DROP
DROP
259