Table of Contents
Advertisement
Configure AirWave details in Windows DHCP server for IPv4
NOTE: AirWave provisioning using IPv6 on Windows based DHCP server is not supported.
To configure the AirWave details in Windows DHCP server for IPv4, do the following steps:
NOTE:
•
•
Procedure
1.
From the Start menu, select Server Manager.
2.
Select Roles -> DHCP -> Server -> w2k8 -> IPv4.
302
Use these steps to configure ZTP for every switch by selecting a different Vendor Class for each
type of switch.
This method is not applicable for ZTP through OOBM.
Aruba 2930F / 2930M Management and Configuration Guide
for ArubaOS-Switch 16.08
Advertisement
Table of Contents
Troubleshooting
