HP Aruba JL253A Management And Configuration Manual page 619

show device-profile config
Syntax
show device-profile config
Description
Displays device profile configuration.
Command context
config
Usage
To verify whether tunneled-node is allowed (when "test" is device-profile name):
switch(device-profile)# show device-profile config test
To verify the output when tunneled-node is disabled:
switch(device-profile)# no allow-tunneled-node
switch(device-profile)# show device-profile config test
Example
switch(config)# show device-profile config
Device Profile Configuration
Configuration for device-profile : default-ap-profile
untagged-vlan
tagged-vlan
ingress-bandwidth
egress-bandwidth
cos
speed-duplex
poe-max-power
poe-priority
allow-jumbo-frames : Disabled
allow-tunneled-node: Enabled
Device Profile Configuration
Configuration for device-profile : test
untagged-vlan
tagged-vlan
ingress-bandwidth
egress-bandwidth
cos
speed-duplex
poe-max-power
poe-priority
allow-jumbo-frames : Disabled
allow-tunneled-node: Enabled
When tunneled-node is disabled:
switch(config)# show device-profile config
Device Profile Configuration
Configuration for device-profile : default-ap-profile
untagged-vlan
tagged-vlan
Chapter 18 Dynamic Segmentation
: 1
: None
: 100%
: 100%
: 0
: auto
: Class/LLDP
: critical
: 1
: None
: 100%
: 100%
: None
: auto
: Class/LLDP
: critical
: 1
: None
619