Information Displayed With The Detail Parameter - HP Aruba JL253A Management And Configuration Manual

For arubaos-switch 16.08

Table of Contents

You can specify all for port-list as shown below.

Output when "all" is specified

switch(config)# show interfaces transceiver all

No Transceiver found on interface 1

No Transceiver found on interface 2

No Transceiver found on interface 24

Transceiver Technical information:

------- ----------- ------------ ------------------ ----------

Information displayed with the detail parameter

When the show interfaces transceiver [port-list] detail command is executed, the following

information displays.

Table 32: General transceiver information

Transceiver-

Chapter 13 Troubleshooting

The switch interface number

Pluggable transceiver type

Pluggable transceiver model

Type of connector of the transceiver

For an optical transceiver: the central wavelength of the laser sent, in nm. If the transceiver

supports multiple wavelengths, the values will be separated by a comma.

Link-length supported by the transceiver in meters. The corresponding transfer medium is

shown in brackets following the transfer distance value, For example, 50um multimode fiber. If

the transceiver supports multiple transfer media, the values are separated by a comma.

Table Continued