ABB ACSM1 Firmware Manual page 112
Motion control drives, speed and torque control program
Hide thumbs
Also See for ACSM1:
- Manual (510 pages) ,
- Firmware manual (448 pages) ,
- Hardware manual (112 pages)
Table of Contents
Advertisement
112
17.06 SIGNAL3 MODE
Defines the way the signal selected by parameter
optional control panel.
(-1) Disabled
(0) Normal
(1) Bar
(2) Drive name
(3) Drive type
Parameters and firmware blocks
FW block: None
17.01 SIGNAL1 PARAM
Signal not displayed. Any other signals that are not disabled are
shown together with their respective signal name.
Shows the signal as a numerical value followed by unit.
Shows the signal as a horizontal bar.
Shows the drive name. (The drive name can be set using the
DriveStudio PC tool.)
Shows the drive type.
is displayed on the
Advertisement
Table of Contents
