Group 22 Speed Feedback; Group 20 Limits - ABB ACSM1 Firmware Manual

Group 20 LIMITS
Definition of drive operation limits.
20
Firmware block:
LIMITS
(20)
Adjusts the drive speed, current and
torque limits, selects the source for
the positive/negative speed reference
enable command and enables the
thermal current limitation.
Block outputs located in other
parameter groups
20.01 MAXIMUM SPEED
Defines the allowed maximum speed. See also parameter
0...30000 rpm
20.02 MINIMUM SPEED
Defines the allowed minimum speed. See also parameter
-30000...0 rpm
3.20 MAX SPEED REF (page 75)
3.21 MIN SPEED REF (page 75)
FW block: LIMITS (see above)
Allowed maximum speed.
FW block: LIMITS (see above)
Allowed minimum speed.
LIMITS
22.08 SPEED TRIPMARGIN.
22.08 SPEED TRIPMARGIN.
Parameters and firmware blocks
113