ABB ACSM1 Firmware Manual page 174

174
50.06 FBA ACT1 TR SRC
Selects the source for fieldbus actual value 1 when parameter
FBA REF2 MODESEL
Value pointer: Group and index
50.07 FBA ACT2 TR SRC
Selects the source for fieldbus actual value 2 when parameter
FBA REF2 MODESEL
Value pointer: Group and index
50.08 FBA SW B12 SRC
Selects the source for freely programmable fieldbus status word bit 28
Note that this functionality may not be supported by the fieldbus communication profile.
Bit pointer: Group, index and bit
50.09 FBA SW B13 SRC
Selects the source for freely programmable fieldbus status word bit 29
Note that this functionality may not be supported by the fieldbus communication profile.
Bit pointer: Group, index and bit
50.10 FBA SW B14 SRC
Selects the source for freely programmable fieldbus status word bit 30
Note that this functionality may not be supported by the fieldbus communication profile.
Bit pointer: Group, index and bit
50.11 FBA SW B15 SRC
Selects the source for freely programmable fieldbus status word bit 31
Note that this functionality may not be supported by the fieldbus communication profile.
Bit pointer: Group, index and bit
Parameters and firmware blocks
FW block: FIELDBUS
is set to (0) Raw data.
FW block: FIELDBUS
is set to (0) Raw data.
FW block: FIELDBUS
FW block: FIELDBUS
FW block: FIELDBUS
FW block: FIELDBUS
(see above)
50.04 FBA REF1 MODESEL
(see above)
50.04 FBA REF1 MODESEL
(see above)
(2.13 FBA MAIN SW
(see above)
(2.13 FBA MAIN SW
(see above)
(2.13 FBA MAIN SW
(see above)
(2.13 FBA MAIN SW
/ 50.05
/ 50.05
bit 28).
bit 29).
bit 30).
bit 31).