Operation By Web Interface; Web Interface Security; Operation By Leica Gnss Spider - Leica GR30 Online Help Manual

Operation by Web interface

The Web interface is the main component used to configure and operate the instrument. A detailed description of every Web Interface
page is included in the Context sensitive help section.
Supported operating systems for the Web Interface
•
Windows Server 2008 SP1 (64 bit)
•
Windows 7 Ultimate (32 bit & 64 bit)
Support internet browsers for the Web Interface
Browser
Internet Explorer
Mozilla Firefox
Opera
Safari
Google Chrome
The Web interface is the primary interface between the user and the instrument. To use the Web interface
correctly make sure the web browser allows JavaScript to be run. Check the web browsers settings if you
have problems using the Web interface.

Web interface security

When accessing the Web interface for the first time use the default User name (Admin) and Password (12345678).
For security reasons, it is recommended to create a new administrator account when logged in for the first
time. After creating the new administrator, log out and relogin with the new user credentials. The default user
account can then be deleted.
Refer to the Access the web interface for the first time and change the default user for a step-by-step guide.

Operation by Leica GNSS Spider

The reference station software Leica GNSS Spider provides some of the same instrument operation functionality as the Web interface.
Some configuration settings are available both in the Web Interface and in Leica GNSS Spider. If such
settings are configured in the Web interface, and then an Upload Settings or Start is done from GNSS
Spider, these will be overwritten. In this case use the Web interface exclusively for settings that are not
available in GNSS Spider.
To operate Leica GNSS Spider, refer to the
•
GNSS Spider / Remote Access for basic information.
•
Leica GNSS Spider Online Help for advanced information.
Requirements
•
GR10/30: Leica GNSS Spider v4.0 or later must be installed.
•
GR25/50: Leica GNSS Spider v4.2 or later must be installed.
Supported version
7 and higher
3.5 and higher
10 and higher
4 and higher
4 and higher
2: Description of the system
11