Related Topics; Gnss Management: Tracking Qzss; Background Information; Setting Descriptions - Leica GR30 Online Help Manual

Related topics

GNSS management: Tracking General
GNSS management: Tracking GPS
GNSS management: Tracking GALILEO
GNSS management : Tracking GLONASS

GNSS management: Tracking QZSS

GNSS management: Tracking QZSS

Background information

Tracking QZSS options may be used to control which health settings are used for each QZSS satellite tracked by the receiver.

Setting Descriptions

The table below describes the settings that can be configured on the Tracking QZSS tab.
Field Description
For each tracked satellite it is possible to set the health as Auto, Healthy or Bad. Use the drop
Satellite health
down list to change the satellite health for all satellites to the same value.
The PRN satellite number.
Satellite
Shows the health setting for this satellite as received from the broadcast navigation message.
Health from almanac
NA, is shown for satellites where no health information is available in the ephemeris.
Shows the configured health setting for each satellite. Either Auto, Healthy or Bad. This field
User defined health
can be edited via the list box.
If the setting is set to Auto, the satellite is used with the health received from the ephemeris. If
the setting is different from Auto, the user defined health setting is used.
Related topics
GNSS management: Tracking General
GNSS management: Tracking GPS
GNSS management: Tracking GALILEO
GNSS management : Tracking GLONASS
GNSS management: Tracking BEIDOU

GNSS management: Data streams

GNSS management: Data streams overview

Tab

GNSS management: Outgoing data stream

GNSS management: Incoming data streams
GNSS management: Outgoing data stream

GNSS management: Outgoing data streams

Background Information
Description
Configure outgoing real time, LB2 (Leica Binary), NMEA or
BINEX messages from the receiver.
Configure incoming meteo and tilt data streams to the receiver.
6: Context sensitive help
91