Related Topics - Leica GR30 Online Help Manual

The configured logging session name.
Session name
The configured data type.
Data type
The configured session priority which determines the Smart clean-up tasks.
Session Priority
Go to GNSS management / Logging sessions / Smart clean-up tab for further information and to
enable the Smart clean-up functionality.
The configured session type, either continuous or timed.
Session type
Timed allows specific logging intervals to be defined.
The configured rate at which the observations are logged.
Logging rate
The configured file length. The file length defines how long data is written to one file before a new
Length of file
file is created.
Indicates if logging doppler observations is activated (yes) or deactivate (no) in the logging
Log doppler
session.
observations
Indicates if logging SNR values in the RINEX file is activated (yes) or deactivate (no) in the logging
Log SNR values
session.
Clicking on the SD card link opens an FTP connection to the folder on the SD card where the data
Store data to
for this logging session is stored. This is only possible when the FTP server access is enabled. To
enable FTP server access, go to Receiver Setup / FTP server.
Shows when the logging session files are automatically deleted.
Auto delete
Only available if the logging session is writing data to an external USB drive.
Archive to
Indicates if the logging session is archived to an external USB drive. If an external USB drive it
(GR25/50 only)
attached and configured for archiving, click on the link External USB drive to access the UDB
drive via FTP.
Indicates if the logging session is archived to an FTP location. If configured, the used FTP location
Archive to FTP
is listed.
location
This field is only shown for timed logging sessions. Shows the number of repeats remaining.
Remaining
repeats
The file name of the last file that this logging session was written to.
Latest file

Related Topics

Logging sessions: Overview
GNSS management: Logging sessions
GNSS management: Smart clean-up
The FTP access to the SD card may not work in all browsers. Set the
FTP server access restrictions to allow anonymous access to ensure
SD card access via the browser link. Go to Receiver Setup / FTP
server.
The SD card can run full when Auto delete is set to Never.
Some browsers have limitations concerning their FTP capabilities.
Please use a dedicated FTP client in case you experience problems
while accessing files via FTP.
For RINEX and Hatanaka logging sessions it will always list the
observation file name (*.10o).
6: Context sensitive help
73