Status: Data Streams - Incoming; Background Information; Field Description - Leica GR30 Online Help Manual

GNSS management: Data streams overview
GNSS management: Outgoing data stream
Streaming session wizard: Configure real time out data stream
Streaming session wizard: Configure LB2 data stream
Streaming session wizard: Configure NMEA data stream
Streaming session wizard: Configure BINEX data stream

Status: Data streams - Incoming

Background information

Displays a list of all configured Incoming data streams from meteo and tilt devices that send data to the receiver.

Field Description

The table below describes the fields in the Data streams / Incoming tab.
The information shown is dependent on the settings configured via the Data stream wizard on the GNSS management: Data streams /
Incoming tab page.
Press the Refresh icon
Meteo Description
The name of the configured meteo device.
Name
The serial number of the configured meteo device.
Serial number
The time and date of the displayed temperature, pressure and humidity reading.
Data time
The temperature recorded by the device at the data time.
Temperature
The pressure recorded by the device at the data time.
Pressure
The relative humidity recorded by the device at the data time.
Relative humidity
The wind azimuth (deg) from the direction that the wind blows, recorded by the device at the
Wind azimuth
data time.
The wind speed in meters per second (m/s), recorded by the device at the data time.
Wind speed
The rain accumulation since last measurement in millimetres (mm), recorded by the device at
Rain Increment
the data time.
The hail detected since last measurement in hits per square centimetre, recorded by the device
Hail indicator
at the data time.
The data messages listed above are not supported by all meteo sensors.
Tilt Description
The name of the configured tilt device.
Name
The serial number of the configured tilt device.
Serial number
The time and date of the displayed temperature and inclination.
Data time
The temperature recorded by the device at the data time.
Temperature
The inclination X recorded by the device at the data time.
Inclination X
The inclination Y recorded by the device at the data time.
Inclination Y
To enable or disable the automatic update of the status page, please go to Receiver setup: Web server and
activate or deactivate the Automatic status page reload.
Real time Description
Icon
The configured message type and version received and used for position correction.
Type/Message
Click on the underlined message type to open a list box showing how many satellites are used.
The percentage of data received versus expected within the last minute.
Percent received
to update the displayed data.
Data stream is active.
Data stream is inactive.
6: Context sensitive help
71