Gnss Spider And Remote Access; Gnss Spider And Remote Access: Overview; Background Information; Setting Descriptions - Leica GR30 Online Help Manual

Access Management: Access settings
Access the web interface for the first time and change the default user

GNSS Spider and remote access

GNSS Spider and remote access: Overview

Background Information

The Spider and remote access configuration page lists all ports on a GR/GM receiver that are open for any OWI based tool to connect
to the receiver and change the settings via OWI commands.
Leica GNSS Spider or other OWI based tools can be connected to the receiver via
•
TCP/IP server
•
TCP/IP client
•
Ntrip server (source)
•
Serial port
•
Radio
•
GSM / Modem / CDMA
It is also possible to connect a receiver to the GNSS Spider site server via a USB connection or via a Bluetooth PAN connection. The
receiver must be connected directly to the Spider site server using the USB cable or the direct Bluetooth connection.
•
Use the default USB connection settings (IP address 192.168.254.2) to configure the site in Leica GNSS Spider.
•
Use the default Bluetooth connection setting (IP address 192.168.253.2) to configure the site in Leica GNSS Spider.
It is recommended to configure two remote access ports as a minimum to utilise the GNSS Spider feature - backup communication.
Detailed information on this topic can be found in the GNSS Spider online help.
Mozilla Firefox does not support the use of certain ports. Use a different internet browser if these ports need
to be used. Ports blocked by default in Mozilla Firefox browser.

Setting Descriptions

The table below describes the fields in the Spider and remote access page.
Setting Description
Icon
To activate or deactivate a session press the Activate icon.
The configured connection type that is used on GNSS Spider and the receiver.
Allow connection
via
The configure device used for the remote access.
Device
The configure port on the receiver used for the remote access.
Port
Press delete to permanently delete the remote access port configuration.
Delete
Press to edit the remote access configuration. The remote access wizard will open.
Edit Spider
and remote port
Connection is active. Port is open.
Connection is inactive. Port is closed.
6: Context sensitive help
159