Configure Coordinates And Site Name Step-By-Step; Configure Tracking Settings Step-By-Step; Configure A Rinex Logging Session Step-By-Step - Leica GR30 Online Help Manual

This section explains how Leica Support can be allowed to access the web interface.
Step Description
Enter the web interface using a user account having Administrator rights.
1
Go to Support / Properties.
2
Activate check box Enable Leica support.
3
Save the settings using the Save changes button. Type topic text here.
4

Configure coordinates and site name step-by-step

This section explains how to configure site coordinates and site name
Step Description
Access the web interface.
1
Go to page GNSS management / Site name and coordinates.
2
Enter values in the text field Site code. This four character ID will be used as identifier for the instrument and will
3
be used for the name of logged files (first four characters of the file name).
Entering values in fields Site name, Marker name and Marker number is optional as this information is only
4
used as header information when creating RINEX files.
In the second section of the page you can enter the reference coordinates of your site. Either geodetic or
5
Cartesian coordinates can be entered.
The time zone can be set to have all receiver activities aligned to a specific time zone. As a result all event
6
messages will refer to the chosen time zone. Also the logged files will have creation time stamps referring to the
chosen time zone.
Press the Save changes button to save all settings.
7

Configure tracking settings step-by-step

This section explains how to configure the tracking settings.
Step Description
Access the web interface.
1
Go to page GNSS management / Tracking.
2
On the General tab the basic tracking options can be configured.
3
Select the satellite systems you want to track using the check boxes.
4
In the row Satellite signals specific signals of a satellite system can be chosen, e.g. the L2P tracking settings
5
for GPS.
Select an elevation cut off angle depending on your site.
6
Select smoothed or unsmoothed code observations using the list box.
7
Enable check box Message on loss of lock if you want to get an event message in case a loss of lock happens.
8
9
In row Oscillator leave the default option "Internal" when no external oscillator is connected.
If an external oscillator should be used select its type and choose the frequency of the time signal.
Press the Save changes button to save all settings.
10
For each active satellite system there is an additional tab which allows to manually set individual satellites to
11
healthy or unhealthy. Please refer to the Content sensitive help topic, GNSS management: Tracking General for
more information on this topic.

Configure a RINEX logging session step-by-step

This section explains how to configure a continuous RINEX logging session.
Step Description
Access the web interface.
1
Go to page GNSS management / Logging sessions.
2
3
Use the button Create a new logging session
The logging session wizard will start.
4
On the first page of the wizard enter a session name and choose RINEX 2.11 or RINEX 3.01in the list box
5
Data type. Select a session priority and choose continuous in list box Session type. Then use the
Continue
On the next page choose a logging rate, the length of the logged file, the dynamics of the session and
6
56
button.
.