Incoming Data Stream Wizard: Configure Tcp/Ip Server; Background Information; Setting Descriptions; Incoming Data Stream Wizard: Configure Tcp/Ip Client - Leica GR30 Online Help Manual

Press to go back to the previous wizard step. Press
Press to cancel and return to GNSS management: Incoming data streams.

Incoming data stream wizard: Configure TCP/IP server

Background Information

The receiver works as a TCP server allowing TCP clients to connect to the receiver's ports and transmit the data streams to the GR/GM
receiver.

Setting Descriptions

The table below describes the settings that can be configured on the Configure TCP/IP server page.
Setting
TCP/IP port
Limit access range
Press to go back to the previous wizard step. Press
Press to cancel and return to GNSS management: Incoming data streams.

Incoming data stream wizard: Configure TCP/IP client

Background Information
The TCP/IP client connection setting allows the receiver to act as a TCP/IP client and connect to a configured IP address and port to
receiver data.
Setting Descriptions
The table below describes the settings that can be configured on the Configure TCP/IP client page.
Setting
TCP/IP server address
TCP/IP port
Press to go back to the previous wizard step. Press
Press to cancel and return to GNSS management: Incoming data streams.
114
Description
Enter the TCP/IP port of the receiver.
Select the range of IP addresses that are authorised to access the receiver.
The valid IP range is from 1.0.0.0 to 223.255.255.255.
Description
Enter the numeric IP address or the hostname of the Server to connect to.
The valid IP range is from 1.0.0.0 to 223.255.255.255.
Enter the TCP/IP port to connect to on the TCP/IP server to receiver data.
to continue to the next wizard step.
to continue to the next wizard step.
to continue to the next wizard step.