Filter Event Log Content; Related Topics - Leica GR30 Online Help Manual

The table below describes the fields in the Status: Event log page.
Press the Refresh icon
Field Description
Icon
The local date and time of the message.
Date / Time
The text message created by the receiver.
Message
Press to download the event log content. The content of the event log will be displayed in a
Download
new browser window and can be stored on the PC.
Filter the event log content to find specific information. The filter settings allow sorting of the
Filter
messages by time, content or message type.
Press to clear the filtering of the event messages and return to the main Event log page.
Clear
filter
Indicates that an event log filter is currently applied. Press to change the filter details.
Filter

Filter Event log content

Select the Filter icon . Select the filtering limits and then press the Apply icon
Field Description
Select the interval to view messages From (the selected data and time) and To (the selected data
From/To
and time).
Activate or deactivate verbose messages.
Show verbose
messages
Verbose messages provide additional information about the receiver status that are not shown
per default, in order to keep the event log clearer.
Filter the messages by selecting the messages content category, such as Logging or Tracking.
Content
Filter the messages by selecting the level of importance.
Message Type
To enable or disable the automatic update of the status page, please go to Receiver setup: Web server and
activate or deactivate the Automatic status page reload.

Related topics

to update the displayed data.
Warning message
This level of receiver message indicates that vital functionality on the
receiver was interrupted. Action should be taken by an administrator to
ensure correct receiver operation.
General message
A general message indicates a problem with a receiver task that does not
influence the most important functionality. Investigate by checking the
receiver configuration.
Information message
Information messages reflect events from the normal receiver activity. No
action is required by the administrator.
Verbose mode will be deactivated after closing the browser,
logging out of the receiver, or rebooting the receiver.
6: Context sensitive help
.
77