Related Topics; Network Connections: Wlan; Background Information; Setting Descriptions - Leica GR30 Online Help Manual

Bluetooth name
Enable discovery
Bluetooth security code

Related topics

Status: Network connections
How to use Bluetooth on the GR25

Network connections: WLAN

Background Information

Use WLAN configuration to configure the WLAN device on the receiver, allowing receiver configuration, data transfer and
communication with network devices.
Or use the internet sharing functionality to connect attached devices to the internet.
WLAN functionality can only be used on GR25/50 with the WLAN radio integrated and the GLR120 WLAN
option installed.

Setting Descriptions

The table below describes the settings that can be configured on the WLAN page.
Wireless radio
Enable/Disable

Field Descriptions

The table below describes the fields on the WLAN tab.
WLAN profiles
148
The Bluetooth name that the GR25 is detected with is
always equal to the Receiver hostname configured in
Receiver setup: Network connections, Ethernet tab.
Bluetooth name is the hostname of the receiver. Please go to Receiver setup /
Network connections: General to change the hostname/bluetooth name.
Activate to allow other devices to detect the Bluetooth device of the GR25.
When deactivated, only devices that had previously been connected to the GR25
via Bluetooth will be able to see the Bluetooth device on the receiver.
Default security code is 0000.
Change the code to only allow specific devices to pair with the GR25 Bluetooth
device. Other devices will be able to see the GR25 Bluetooth device but will not be
able to connect.
Description
Activate to power the WLAN radio on the receiver. If disabled, the GR25/50 WLAN radio
cannot be used.
The WLAN radio is deactivated. Press to activate.
The WLAN radio is activated. Press to deactivate.
It is recommended to turn off the WLAN radio when not in
use to lower the power consumption of the receiver.
Description