Logging Session Wizard: Compact Rinex (Hatanaka); Setting Descriptions - Leica GR30 Online Help Manual

Agency
Include SNR values
Log doppler observations
Mixed navigation file
When changing the logging rate of a high rate logging session, the session must first be deactivated. After
changing the rate the session can be reactivated and will then use the new rate.
Example: A 20 Hz MDB logging session should be changed into a 50 Hz MDB session.
Press to go back to the previous wizard step. Press
Press to cancel and return to GNSS management: Logging session.

Logging session wizard: Compact RINEX (Hatanaka)

Setting Descriptions

The table below describes the settings that can be configured on the Compact RINEX (Hatanaka) page.
Setting
Logging rate
Length of file
Dynamics
Operator
abcdefghijklmnopqrstuvwxyz
- _ and a "space" are allowed.
•
If left empty, the field in the RINEX header will be left blank.
Enter the name of the agency that is to appear in the RINEX file header.
•
Maximum number of characters allowed is 40.
•
Only certain
ASCII characters
0123456789
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
- _ and a "space" are allowed.
•
If left empty, the field in the RINEX header will be left blank.
Activate to include the (unmapped) SNR observations in the RINEX file.
Activate to include the doppler observations in the RINEX file.
Activate to write a single navigation file for all tracked satellite systems instead of writing
separate navigation files for each satellite system.
Description
Select the rate at which the observations are to be logged.
Note: A faster logging rate results in higher resource consumption on the receiver.
Choose a value from 5 minutes to 24 hours.
The file length defines how long data is written to one file before a new file is created.
Raw data for the Compact RINEX logging session can be logged in static or moving
(kinematic) mode.
Enter the name of the operator that is to appear in the RINEX file header.
•
Maximum number of characters allowed is 20.
•
Only certain
ASCII characters
0123456789
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
- _ and a "space" are allowed.
•
If left empty, the field in the RINEX header will be left blank.
are allowed.
to continue to the next wizard step.
are allowed.
6: Context sensitive help
125