Rinex - Leica GR30 Online Help Manual

Hide thumbs Also See for GR30:
Table of Contents

Advertisement

RTCM 9,2 (v2.2)
RTCM 9,2 (v2.3)
RTCM 18,19 (v2.1)
RTCM 18,19 (v2.2)
RTCM 18,19 (v2.3)
RTCM 20,21 (v2.1)
RTCM 20,21 (v2.2)
RTCM 20,21 (v2.3)
RTCM 1,2,18,19 (v2.1)
RTCM 1,2,18,19 (v2.2)
RTCM 1,2,18,19 (v2.3)
RTCM 1,2,20,21 (v2.1)
RTCM 1,2,20,21 (v2.2)
RTCM 1,2,20,21 (v2.3)
*CMR from a Leica receiver or Leica GNSS Spider contains Glonass corrections.
To use Glonass corrections, CMR message 3 needs to be decoded by the rover. Leica rovers and some 3rd party rovers (e.g. Javad,
Topcon) can apply GLO corrections in CMR format.

RINEX

RINEX stands for Receiver INdependant EXchange format and has become a standard for GPS data. This receiver supports the
following published format versions:
Version 2.11 was defined in the revised version of the paper published by W. Gurtner and G. Mader in the CSTG GPS-Bulletin of
September/October 1990 (Revisions: 1993 - 2005). The complete description can be found here:
ftp://ftp.unibe.ch/aiub/rinex/rinex211.txt.
Version 3.01 was defined in the paper by W. Gurtner and L. Estey made available in November 2007. The complete description can be
found here: ftp://ftp.unibe.ch/aiub/rinex/rinex301.pdf.
Version 3.02 is based on RINEX version 3.01 and was made available in April 2013. The complete description can be found here:
ftp://igs.org/pub/data/format/rinex302.pdf
The naming convention for RINEX files is as follows: ssssdddhxx.yyt
RINEX file
Description
component
4 character station name (Site code)
ssss
GPS day of the year
ddd
Hour of the day. If the file is created for the 1st hour of the day then h = a. h can have any value
h
from a to x. The hour indicator refers to GPS time, not local time.
Note: If a 24 hour file is created, then h = 0 (zero).
Start time of RINEX file creation, given in minutes of the current hour. If you have 1hour files xx
xx
is not written.
Year
yy
File type:
t
294
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
o for observation files
d for Hatanaka compressed observation files
g for GLONASS navigation files
l for GALILEO navigation files
n for GPS navigation files
q for QZSS navigation files
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gr50Gm30

Table of Contents