Device
Port
Data rate
Delete
Edit data stream
Activate
Create new data
stream
Related topics
Data streams: Overview
GNSS management: Incoming data streams
Incoming data stream wizard: Select data steam
Incoming data stream wizard: Configuration Meteo
Incoming data stream wizard: Configuration Tilt
Incoming data stream wizard: Configure real time in data stream
Incoming data stream wizard: Conneciton
Incoming data stream wizard: Configure TCP/IP server
Incoming data stream wizard: Configure TCP/IP client
Incoming data stream wizard: Configure Ntrip client
Incoming data stream wizard: Serial port
Incoming data stream wizard: Summary
The configured device used for receiving the incoming data stream. This
can be a network connection or a serial connection.
The configured port on the receiver used for receiving the incoming data
stream.
The configured data rate for meteo and tilt data as it will be set on the
external sensor.
Press delete to permanently delete the data stream.
Press to edit the data steam settings. The incoming data stream wizard
will open.
The data stream is inactive. Click to start receiving
data..
The data stream is active. Click to stop receiving
data..
Upon pressing Create a new data stream, the Data stream wizard
opens.
The wizard is a tool that guide you through the following stages of an
incoming data stream configuration:
•
Real time data stream:
•
Received data types - real time, meteo or tilt data
•
Message selection - RTCM2, RTCM3. Leica, Leica
4G or CMR/CMR+
•
Connection type and configuration
•
Activating the data stream
•
Meteo or Tilt data stream:
•
Received data types - real time, meteo or tilt data
•
Selection of meteo/tilt device and port used
•
Activating the data stream
6: Context sensitive help
105