Background information
Upload new antenna files, create new antennas and restore antenna default values.
Field Descriptions
The table below describes the fields in the Antenna management tab.
Field
Loadable antenna files
Location
Delete
Install
Upload new
antenna file
Installed antennas
Type
Delete
Edit antenna
Create new antenna
(copy)
Create new
antenna
Restore default
values
Related topics
File upload
Create/Edit and Antenna
GNSS management: Select antenna
GNSS management: Create/Edit an Antenna
Description
The name of the antenna file. All antenna files loaded onto the SD card are
shown.
The location of the antenna file.
Select to delete the antenna file.
Select to install the antenna file.
Select to upload a new LIST.ANT antenna file exported previously from LGO
from the computer to the receiver. The File upload page will open.
All antennas currently configured on the receiver are listed.
Shows the antenna type. Default antennas are available in the factory default
settings. User defined antennas have been added manually.
Press Delete to permanently delete the antenna.
The ADVULLANTENNA cannot be deleted.
Press to edit the antenna settings. The Edit antenna page will open. The
antenna name cannot be edited.
The ADVULLANTENNA cannot be edited.
Create a new antenna based on the settings of an existing antenna.
Press to create a new antenna. The Create antenna page will open.
Restore the default antenna settings. This will restore all default antennas with
the factory default settings. User defined antennas will not be deleted.
The restore default button fills all fields with the default
values and stores these values. Pressing the save
button is not necessary. When accepting the
confirmation message, all settings on this page are
overwritten with the default settings.
6: Context sensitive help
133