Connecting To The Web Server - Leica GS18 User Manual

4.1.6
Description
Accessing the Web
server via cable step-
by-step
Accessing the Web
server via Bluetooth
step-by-step
Operation
• \\192.168.254.1\ for field controller
\\192.168.254.3\ for other instruments
•
7. Press Enter.
A file browser opens. You can now browse within the folders on the
instrument.

Connecting to the Web Server

The Web server is a web-based tool to view the status of and configure the
GNSS instruments. The Web server application is integrated into the GS firm-
ware and cannot be deleted.
Action
1. Start the PC and turn on the GS instrument.
☞
Instead of connecting to your PC, you can connect your GS
instrument to the field controller.
2. Connect the GS instrument with the GEB234 cable to the PC. Refer
to "4.1.5 Connecting to a Personal Computer".
3. Double-Click the Configure GS connection shortcut from the desk-
top of your PC. The GS network adapter is configured with IP
address: 192.168.254.1. A DOS window appears when the configu-
ration was successful. Press any key to exit the DOS window. The
Configure GS connection shortcut disappears from the desktop.
4. Start the web browser of your PC.
5. Type in http://192.168.254.2 and press enter to access the web
server of GS instrument.
To access the Web server the tasks following have to be done:
Configure the PC's Bluetooth device
•
Establish a Bluetooth connection between PC and GS
•
Accessing the Web server
•
Configuring the PC's Bluetooth device
Action
1. Start your PC.
2. Activate the Bluetooth device of your PC.
3. Go StartÞSettingsÞNetwork Connections.
4. Double-click Bluetooth from the LAN or High-Speed Internet
device list. The Bluetooth Properties windows is started.
5. In the General page, select Internet Protocol (TCP/IP) from the list
and click Properties. The Internet Protocol (TCP/IP) properties
windows is started.
6. Set IP address: 192.168.253.1 and Subnet mask: 255.255.255.0
and click OK confirm the settings.
☞
This procedure has to be done only once.
35