Step-By-Step Configure And Ftp Push Location; Step-By-Step Use An Ftp Push Location In A Logging Session - Leica GR30 Online Help Manual

Up to 10 logging sessions can be configured on a GR/GM receiver. Each logging session can push the logged files to a different FTP
location. These FTP locations need to be configured before assigning them to a logging session.

Step-by-step configure and FTP push location

Step Description
Open the receiver's web interface in a browser window by typing in the receivers IP or hostname.
1
2
Go to GNSS management / FTP locations and press the Create new FTP location
Enter a unique Name for the FTP location and the FTP server hostname or IP address of the FTP server.
3
Enter the FTP server port number at which the FTP server can be accessed (generally this is port 21).
4
Enter the FTP root directory if this is not directly accessed when accessing the FTP server. This directory
5
must already exist on the FTP server. It will not be created during the FTP push.
Enter Username and Password to access the FTP server. These fields can be left blank if anonymous
6
access is enabled on the FTP server.
In the Send commands field, FTP protocol commands can be added that will be executed as soon as the
7
FTP server is accessed. These fields can generally be left blank.
It is recommended to keep the Use passive mode check box enabled. If active mode is need, disable the
8
check box.
9
Optionally, the entered FTP details can be tested by pressing Test FTP location
accessing the FTP server, writing and deleting a file on the server and closing the FTP server connection.
10
Press save changes
locations overview page where all configured FTP servers are listed.

Step-by-step use an FTP push location in a logging session

Step Description
Go to GNSS management / Logging sessions to create a new logging session or edit an existing logging
1
session.
2
Press the Create new Logging session
wizard.
Enter all necessary logging details or changes.
3
4
Press the Continue
Define if the files should be zipped by activating or deactivating the Zip files check box.
5
Choose a directory naming convention defining how the logged data will be stored onto the SD card.
6
Open the Choose FTP location list box. It lists all FTP push locations configured on the receiver. Select an
7
FTP location.
Open the Delete files list box if automatic file delete is to be used. Select the After archiving option to
8
delete the files on the SD card after they have successfully been pushed to the FTP location.
9
Press the Continue
Activate the logging sessions and store the settings. This will redirect to the logging sessions overview page
10
where all configured logging sessions are listed.
On the GNSS management / FTP locations page, the Queue column lists the number of files queued to be
pushed to this FTP location. Generally this is listed as 0. If there is a problem with the FTP location (e.g. the
to store the configured FTP push location. This will redirect to the FTP push
or Edit logging session
icon.
icon.
.
. This will test
to open the logging sessions
9: How to
213