File Naming (Applies To All Auxiliary File Versions) - Leica GR30 Online Help Manual

•
Observations can be output in the order as defined in the header definition "# / TYPES OF OBSERV".
•
TN / TE observations shall be set to ±9999.999999, if the measurement value is out of the measuring range of the tilt device.

File naming (applies to all auxiliary file versions)

Product file names are generated from the file creation date, time and type of product.
RINEX PRODUCTS OF LENGTH OF 1 HOUR PLUS BY DEFAULT WILL BE NAMED: ssssdddh.yyo
ssss
ddd
hh
yy
o
RINEX PRODUCTS WHOSE LENGTH IS LESS THAN 1 HOUR, E.G. 10 MINUTES, WILL BE NAMED:
ssss
ddd
hh
yy
o
Overview of RINEX Auxiliary file version in RefWorx
Auxiliary File Version
2.11
2.20
3.01
3.02
4-character ID for the receiver/antenna
day of year
character for the starting hour in the day
two-digit year
type of file: a - auxiliary
ssssdddhmm.yyo
4-character ID for the receiver/antenna
day of year
character for the starting hour in the day
two-digit year
type of file: a - auxiliary
Version of RINEX logging session
RINEX2
RINEX2
RINEX3
RINEX3
Appendix D: RINEX
RefWx version
never
≥ 1.0
3.0x
≥ 3.1
265