Access Management: User Management; Background Information; Setting Descriptions; Puk User - Leica GR30 Online Help Manual

Access Management: User management

Background Information

User management configuration allows the Administrator to
•
View configured users
•
Create new users
•
Delete users
•
Edit users details and password

Setting Descriptions

The table below describes the settings that can be configured on the User management tab.
Field
User
Web interface access
FTP server access
Delete
Edit user
Create new user
(copy)
Create new
user
Restore default
values

PUK user

The PUK (PIN Unlock Key) user is a pre-installed administrator-level user account on each GR/GM based on the receiver's serial
number.
It can be used to access the receiver in case all other user credentials have been lost / after the settings have been formatted.
User name: PUK.
154
•
Configure the web interface user level
•
Configure the FTP server access level
Description
The configured user name.
The users web interface access rights.
The users FTP server access rights.
Press delete to permanently delete the user.
The last remaining Administrator user cannot be deleted.
Press to edit the selected users details and password.
Press to create a new user based on the existing user settings.
Press to create a new user.
Restore the default user settings. This will delete all users and load the admin user
with the default values.
If the web interface access level is set to Restricted, then pressing this icon will
redirect you to the login page. Login is then only possible with the default
administrator settings.
The restore default button fills all fields with the default
values and stores these values. Pressing the save button
is not necessary. When accepting the confirmation
message, all settings on this page are overwritten with
the default settings.