Connecting To The Web Server - Leica GS18 User Manual

Connect to PC via USB
cable step-by-step
4.1.6
Description
Accessing the Web
server via cable step-
by-step
Accessing the Web
server via Bluetooth
step-by-step
34
7. The InstallShield Wizard Completed window appears.
8. Click Finish to exit the wizard.
1. Start the PC.
2. Plug the cable into the instrument.
3. Turn on the instrument.
4. Plug the cable into the USB port of the PC.
5. Press the Windows Start button at the bottom left corner of the
screen.
6. Type the IP address of the device into the search field.
\\192.168.254.1\ for field controller
•
7. Press Enter.
A file browser opens. You can now browse within the folders on the
instrument.

Connecting to the Web Server

The Web server is a web-based tool to view the status of and configure
the GNSS instruments. The Web server application is integrated into the GS
firmware and cannot be deleted.
1. Start the PC and turn on the GS instrument.
☞
Instead of connecting to your PC, you can connect your
GS instrument to the field controller.
2. Connect the GS instrument with the GEV234 cable to the PC. Refer
to 4.1.5 Connecting to a Personal
3. Double-Click the Configure GS connection shortcut from the
desktop of your PC. The GS network adapter is configured with IP
address: 192.168.254.1. A DOS window appears when the configur-
ation was successful. Press any key to exit the DOS window. The
Configure GS connection shortcut disappears from the desktop.
4. Start the web browser of your PC.
5. Type in http://192.168.254.2 and press enter to access the web
server of GS instrument.
To access the Web server the tasks following have to be done:
Configure the PC's Bluetooth device
•
Establish a Bluetooth connection between PC and GS
•
Accessing the Web server
•
Configuring the PC's Bluetooth device
Action
1. Start your PC.
2. Activate the Bluetooth device of your PC.
3. Go StartÞSettingsÞNetwork Connections.
Computer.
Operation