Related Topics; Receiver Setup: Receiver Settings Backup; Background Information; Setting Descriptions - Leica GR30 Online Help Manual

Delete
Install
Upload new language
file

Related topics

Receiver setup: File upload

Receiver setup: Receiver settings backup

Background information

The Receiver settings backup page lists all receiver setting files loaded onto or stored on the receivers SD card. A receiver settings file
contains the complete system configuration of a GR/GM receiver.
With the backup functionality the receiver settings can be stored for archiving or the file can be used on other GR/GM receivers if the
configuration is to be the same on several receivers. The system configuration is stored in a zipped file.
The receiver will always create a backup of the current receiver settings before installing a new receiver
settings file. In case the installation of the new receiver settings file fails, this backup file is listed in the
Available receiver settings list. This allows reverting to the old settings.
Please check the event log after installing a receiver settings file. The event log will show if the installation
was successful.

Setting Descriptions

The table below describes the fields in the Receiver settings backup tab.
Setting
Available receiver settings
Delete
Download
Install
Backup current receiver settings
Upload new receiver settings
the receiver is set to using English. After the
firmware upgrade, the language file for the new
release firmware must be installed manually.
Select to delete the language file from the SD card.
The default English language file cannot be deleted.
Press to install the language file.
Press to upload a new language file from the computer to the receiver. Opens
the File upload page.
Description
Lists all receiver setting files loaded onto or stored on the receivers SD card.
Press to delete the backup settings file.
Press to download the file from the receiver to the computer.
Press to install the settings on the receiver.
Press to create a backup (.zip file) of the current receiver settings.
Press to upload a new receiver settings file from the computer to the receiver.
Opens the File upload page.
6: Context sensitive help
193