Related Topics; Troubleshooting: Installing Usb Drivers; The Web Interface Is Not Available; Setup Via Web Interface Over Bluetooth Or Wlan (Gr25/50) - Leica GR30 Online Help Manual

Hide thumbs Also See for GR30:
Table of Contents

Advertisement

Step
Description
Turn on the instrument.
1
Start the computer.
2
Loosen the screw on the SD card/USB port cover.
3
Open the SD card/USB port cover.
4
Plug the USB cable into the USB port on the instrument.
5
Plug the USB cable into the USB port of the computer.
6
Open a browser and type in the IP address: 192.168.254.2 to access the Web interface.
7
Use the default User name (Admin) and Password (12345678).
8
After logging in the first time you must create a new user account, including a new user name and password.
The default user account can then be deleted. Go to Access the web interface for the first time and change
the default user for a step-by-step guide.
Configure the instrument for all required settings.
9

Related topics

Setup via Web Interface over USB, for the first time
Setup via Web Interface over Ethernet and DHCP

Troubleshooting: Installing USB drivers

The Web interface is not available

1.
Have you followed the steps outlined in Setup via Web Interface over USB, for the first time ?
2.
If the web interface is not available it might be necessary to manually assign an IP address to the virtual network adapter. To
do so please follow the steps below:
Windows 7
Step
Description
Go to Start / Control Panel / Network and Sharing Center / Change adapter settings.
1
Find the network connection using the Remote NDIS based LGS GR Device.
2
Right click and select Status.
3
Click on Properties.
4
Select the item, Internet Protocol Version 4 (TCP/IPv4) and click on Properties.
5
Pick option Use the following IP address and choose an address in the range of 192.168.254.1 ...
6
192.168.254.255 - except 192.168.254.2 which is the IP of the GR/GM receiver. Use subnet mask
255.255.255.0.
Close all dialogs with OK or Close. Disconnect and reconnect the USB cable.
7

Setup via Web Interface over Bluetooth or WLAN (GR25/50)

Setup via Web Interface over Bluetooth (GR25/50)

Only available for GR25/50 with bluetooth radio installed.
50
a.
Left button
b.
Right button
c.
Up button
d.
Cancel button
e.
Down button
f.
Enter button
g.
Screen
h.
ON/OFF button

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gr50Gm30

Table of Contents