Device Management: GPRS / Internet initialization
Setting Descriptions
The table below describes the settings that can be configured on the GPRS / Internet initialization page.
This page is only shown when Mobile internet capable is set to Yes on the New / Edit modem/phone page.
Settings
Description
Enter a valid AT command to initialize the device.
Init string 1
Enter a valid AT command to initialize the device.
Init string 2
Enter a valid AT command to connect to the internet.
Connect string
Press
to continue to the next wizard step.
Press
to cancel and return to Device Management: Modem / Phone
Device Management: GSM / CSD initialization
Setting Descriptions
The table below describes the settings that can be configured on the GSM / CSD initialization page.
Settings
Description
Enter a valid AT command to initialize the device.
Init string 1
Enter a valid AT command to initialize the device.
Init string 2
Enter a valid AT command to connect to the device.
Dial string
Enter a valid AT command to end the network connection.
Hangup string
Enter a valid AT command to switch into command mode before using the hangup string.
Escape string
Press
to change settings.
Press
to save the logging session.
Press
to cancel and return to Device Management: Modem / Phone
Receiver setup: Event log
Background Information
The Configuration: Event log page is used for configuring and editing the settings for sending automatic event emails containing all
messages from the event log.
The page also allows settings the automatic delete interval for all event log messages.
Setting Descriptions
The table below describes the settings that can be configured on the Event log page.
Cleanup
180
Description