Insert And Remove A Sim Card Step-By-Step - Leica GR30 Online Help Manual

Remove the compartment cover.
2
Insert the slot-in device into the P3 Slot-in port.
3
The LED's on the device must face downwards.
Reattach the compartment cover and tighten the screws. All screws have to be tightened to ensure that the
4
instrument is waterproof.
Attach the antenna for the slot-in device to Communication Slot-in port Antenna (P3) which is located below
5
the Slot-in port next to the Power port (PWR).

Insert and remove a SIM card step-by-step

Step Description
The SIM card is inserted into a slot on the side of the slot-in device.
Take the SIM card and a pen.
Using the pen, press the small button of the SIM card slot to eject the SIM card holder.
1
Take the SIM card holder out of the slot-in-device.
2
Place the SIM card into the SIM card holder, the chip facing up.
3
Insert the SIM card holder into the SIM card slot, the chip facing the connectors inside the slot.
4
LED indicators
Each slot-in-device for a radio or digital cellular phones has Light Emitting Diode indicators on the bottom side. They indicate the basic
device status.
IF the
Mode LED
on
SLR1-2 with Satelline
TA11
a. Mode LED, available for Satelline TA11
b. Signal strength LED
c. Data transfer LED
d. Power LED
is
red
11: External Devices
THEN
the device is in the programming
mode controlled from the PC via
cable.
229