Related Topics; Firmware Upgrade Using Leica Gnss Spider; Loading A Language File - Leica GR30 Online Help Manual

Related topics

Software: Overview
Is my firmware up to date?

Firmware upgrade using Leica GNSS Spider

Loading a Language file

Status: Receiver Information
Receiver setup: Firmware management
Firmware upgrade using Leica GNSS Spider
Leica GNSS Spider can also be used to install the firmware. Loading the firmware to the SD card and installing it on the instrument is
done in one step when using GNSS Spider.
Step Description
Open the Leica GNSS Spider Site Server and select the Site tab.
1
2 Right click on the receiver site and choose Firmware upgrade.
3 Select the firmware file to be uploaded and press Upgrade.
4 Leica GNSS Spider will automatically upload and install the new firmware and then reboot the sensor. A
message will appear in the GNSS Spider Watch View to confirm that the upgrade was completed
successfully.
For further information, refer to the Leica GNSS Spider Online Help.
Related topics
Software: Overview
Firmware upgrade
Loading a Language file
The system software enables multiple languages to be stored on the SD card. Only one language can be activated at a time.
Follow these steps to upload a new language file:
Step Description
1 Go to the Receiver Setup / Tools / Languages page in the GR/GM receiver Web interface.
2
Click, Upload new language file
3 Click the Browse... button and select the new language file .
4
Click the Upload button
5 You will be directed back to the Language management page once the file upload is complete.
6
Click the Install
Related topics
Software: Overview
Receiver setup: Language management
202
to copy the file to the SD Card .
button next to the desired language in the table.