How To Backup And Restore Receiver Settings; Background Information; Before You Begin; Step-By-Step Backup Receiver Settings - Leica GR30 Online Help Manual

The APN profile used for the mobile Internet setup might make it necessary to change the HTTP port if the
default HTTP port is not available. If the HTTP port has been changed, the web interface access then
requires entering the HTTP port with the receivers hostname in the browser window. (e.g.
http://my_receiver.org:5689)

How to backup and restore receiver settings

Background information

If several receivers are to be used with the same configuration, with differences in the coordinates and IP settings only, it would be
convenient to not have to type in these settings into every receiver.
For any use case that requires the same receiver configuration to be installed more than once, the backup and restore functionality
saves a lot of time and effort.

Before you begin

Installing the same receiver functionality on more than one receiver via the restore function also sets the same communication settings
on all receivers. If the receivers are then all connected to the same network, the same IP and hostname may connect to any of the
available receivers. Make sure that the communication settings are clearly dedicated for each receiver.
Access management is overwritten with the access settings stored in the backup file when installing a new
set of receiver settings. Make sure that the access settings stored in the backup file are known, in order to
prevent being locked out of the web interface.

Step-by-step backup receiver settings

Step Description
Open the receiver's web interface in a browser window by typing in the receivers IP or hostname.
1
Go to Receiver setup / Tools and open the Receiver settings backup tab.
2
3
Press Backup current receiver settings
information and stores it in a zipped backup file.
4
The backup file is now listed on the Receiver settings backup page. Press Download
file to your PC. It can then be used to install the same settings on another receiver or archived for later use.
The file name contains the date and time of the file being created and the receiver's serial number. This
simplifies keeping track of archived receiver backup files.

Step-by-step restore/install receiver settings

Step Description
Open the receiver's web interface in a browser window by typing in the receivers IP or hostname.
1
Go to Receiver setup / Tools and open the Receiver settings backup tab.
2
3
Press Upload new receiver settings
page is opened.
Use the browse button to find the backup file on your PC. This file can be from the same receiver or from a
4
. The receiver now collects all receiver configuration
to upload a zip file containing all receiver settings. The file upload
9: How to
to download the
209