Related Topics; How To Use Dyndns Service On The Receiver; Background Information; Before You Begin - Leica GR30 Online Help Manual

select static and enter the IP address.
Activate the Use as default gateway check box if all data traffic is to be done via the mobile Internet
8
connection. If activated, all FTP push, streamed data, event email sending and DynDNS updates are done
via the mobile Internet connection.
9
Press Save changes. The mobile Internet configuration is now stored. Check the Event log and the
Status / Network connection page to make sure the mobile internet connection is successfully established.
Please note: The APN profile used for the mobile Internet setup might make it necessary to change the http
port if the default http port is not available. If the http port has been changed, the web interface access then
requires entering the http port with the receivers hostname in the browser window. (e.g.
http://my_receiver.org:5689)

Related topics

Slot-in devices
Device Management: New / Edit modem/phone device
Status: Network connections

How to use DynDNS service on the receiver

Background information

The DynDNS functionality allows clients to use an Internet domain name to address a receiver with a dynamic IP address.
The typical use case for this functionality is a receiver with an Internet connection via GPRS. In this setup the GR/GM receiver will have
a different IP address every time the Internet connection is established.
Another use case is a receiver behind a router in a local network, where the router is connected to the Internet and regularly gets an
updated IP address. The receiver will check every 12min for a new IP address on the router and updates the DynDNS settings when
necessary.

Before you begin

Register at a DynDNS service: Go to http://www.dyndns.com or http://www.no-ip.com or http://www.Two-DNS.com and register for an
account. At registration enter the hostname you want your receiver to be accessed with. Enable wildcard use. Mail exchanger
functionality is not necessary.

Step-by-step

Step Description
Attach and configure a mobile internet device.
1
Please see Network connections: Mobile internet on how to configure the mobile internet device.
Open the receiver's web interface and go to Receiver setup / DynDNS.
2
Select the DynDNS service you have registered your account with from the list.
3
Enter the hostname that you entered when registering for a DynDNS account.
4
Enter the user name and password that you entered when registering for a DynDNS account.
5
6
Press Save changes. The DynDNS settings are now stored. Check the event log and the Status /
Network connection page to make sure the current receiver IP address is successfully updated at the
DynDNS service.
208