APN
User name
Password
IP address
Connected to
Related topics
Receiver setup: Device Management: Overview
How to set up a mobile Internet connection
Network connections: Bluetooth
Background Information
Use Bluetooth configuration to configure the Bluetooth device on the receiver.
Bluetooth is available only on GR25 receivers with the bluetooth hardware option.
Setting Descriptions
The table below describes the settings that can be configured on the Bluetooth page.
Configure device for Internet
usage
Enable Bluetooth radio
The Puk code is a security code for the SIM card for some devices. The Puk
code needs to be entered when the pin code has been entered incorrectly
more than three times. The Puk code will unblock the SIM card.
Enter the access point name (APN) of a server from the network provider,
which allows access to data services. Contact your provider to obtain the
correct APN.
Necessary to access certain APN's. Contact your provider for the APN user
name.
Necessary to access certain APN's. Contact your provider for the APN
password.
Select a dynamic or static IP address to be used. For a static address enter
the IP address manually.
Only available on the GR25/50.
Select the physical serial port for data transmission
•
Serial port 1
•
Serial port 2
For the GR10/30 & GM10/30, Serial port 1 is
configured automatically as there is only one serial
port available.
For slot in devices, this field is not available, the
slot-in port is selected automatically.
This setting is not available when a slot-in device is
selected.
Description
Activate to power the Bluetooth device on the receiver. If disabled, the GR25
Bluetooth device cannot be used.
It is recommended to turn off the Bluetooth device when
not in use to lower the power consumption on the
receiver.
6: Context sensitive help
147