Related Topics; Gnss Management:tracking Beidou; Background Information; Setting Descriptions - Leica GR30 Online Help Manual

Shows the configured health setting for each satellite. Either Auto, Healthy or Bad. This field
User defined health
can be edited via the list box.
If the setting is set to Auto, the satellite is used with the health received from the almanac. If
the setting is different from Auto, the user defined health setting is used.
The Galileo system is still in its test phase.
For this reason, within productive GNSS services signals from Galileo satellites should either:
a) not be used at all
b) or only be used with default satellite health settings.
Default satellite health:
By default, the health of all satellites is set to "Auto". With this setting, only Galileo satellites which are
marked as Healthy in the satellite almanac will be tracked.
User defined satellite health:
It is possible to force "Unhealthy" satellites to "Healthy". This will overwrite the "Unhealthy" setting from the
satellite almanac. As a result the satellite will be tracked. However, this can lead to tracking or positioning
issues as invalid data may be sent by "Unhealthy" satellites. It is also possible to force satellites which are in
the almanac declared "Healthy" to "Unhealthy".
Navigation data:
Galileo navigation data is logged in RINEX2 and RINEX3 sessions. It is also contained in LB2 (E) streams.

Related topics

GNSS management: Tracking General
GNSS management: Tracking GPS
GNSS management: Tracking GLONASS
GNSS management: Tracking BEIDOU
GNSS management: Tracking QZSS

GNSS management:Tracking BEIDOU

Background information

Tracking BeiDou options may be used to control which health settings are used for each BeiDou satellite tracked by the receiver.

Setting Descriptions

The table below describes the settings that can be configured on the Tracking BeiDou tab.
Field Description
For each tracked satellite it is possible to set the health as Auto, Healthy or Bad. Use the drop
Satellite health
down list to change the satellite health for all satellites to the same value.
The PRN satellite number.
Satellite
Shows the health setting for this satellite as received from the broadcast navigation message.
Health from almanac
NA, is shown for satellites where no health information is available in the ephemeris.
Shows the configured health setting for each satellite. Either Auto, Healthy or Bad. This field
User defined health
can be edited via the list box.
If the setting is set to Auto, the satellite is used with the health received from the ephemeris. If
the setting is different from Auto, the user defined health setting is used.
90