Related Topics; Incoming Data Stream Wizard: Connection; Background Information; Setting Descriptions - Leica GR30 Online Help Manual

Select the position type to be used
Position type
Position type
Reference Station
Monitoring
Network RTK
The following position quality levels are available:
Max. position
quality
Position quality
RTK fixed position
Differential code
(DGPS position)
Press to go back to the previous wizard step. Press
Press to cancel and return to GNSS management: Incoming data streams.

Related Topics

Incoming data stream wizard: Connection

Incoming data stream wizard: Connection

Background Information

Data can be received by the receiver using a variety of communication types.

Setting Descriptions

The table below describes the settings that can be configured on the Connection page.
Setting
Connection type
Description
For detecting antenna movements using long baselines.
For monitoring applications using short baselines.
For rover-like position calculation.
Site monitor option
available
not available
Description
Select the connection type.
TCP/IP server
TCP/IP client
NTRIP client
Serial port
to continue to the next wizard step.
The receiver works as a TCP server allowing TCP
clients to connect to the receiver's ports to
transmit the data streams to the GR/GM receiver.
This setting allows the receiver to act as a TCP
client and connect to a configured IP address and
port to receive data.
This mode allows the receiver to act as an NTrip
Client and receive data from an Ntrip Caster. The
receiver initiates that connection to the Ntrip
Caster and may need to send authentication
information.
A source table can be downloaded to allow
selecting a mount point to connect to.
The receiver receives data via the physical serial
port.
6: Context sensitive help
113