Gnss Management; Gnss Management: Overview - Leica GR30 Online Help Manual

Hide thumbs Also See for GR30:
Table of Contents

Advertisement

The current power consumption of the receiver
Power Consumption
GR25/50
SD Card
Description
The total storage space available on the SD card.
Total size
The available storage space remaining on the SD card.
Memory left
External USB drive
Description
GR25/50
The total storage space available on the external USB drive.
Total size
The available storage space remaining on the external USB drive.
Memory left
Receiver internal
Description
temperature
Shows the current temperature of the processor board in the receiver [units = degrees
Current temperature
Celsius]. This information will be updated every 5 seconds.
Shows the maximum temperature since the last reset of the all-time high/low value. The
All time high
update rate of this value is 5 seconds. This value will be kept after a reboot of the receiver if
the temperature at reboot does not exceed it.
Shows the minimum temperature since the last reset of the all-time high/low value. The update
All time low
rate of this value is 5 seconds. This value will be kept after a reboot of the receiver if the
temperature at reboot does not fall below it.
CPU load
Description
Displays the current CPU load.
Current CPU usage
CPU load history
Description
The CPU load history diagram shows the CPU load for the last 10 minutes. The graph is
Diagram
visible after a few minutes and is only shown when this Status page is accessed. If you leave
the status page, all information in the graph is deleted.
To enable or disable the automatic update of the status page, please go to Receiver setup: Web server and
activate or deactivate the Automatic status page reload.

GNSS management

GNSS management: Overview

Configure all GNSS data related settings, such as logging sessions, data streams and the tracking settings. Or enter site specific
information such as the site name, position and antenna details.
Menu option
Site name and coordinates
Tracking
Charging is enabled but an invalid external
supply is detected (<18V).
Charging is disabled.
No internal battery is detected.
Battery error.
Description
Enter the site name and coordinates of the receiver.
Configure the satellite tracking settings.
General
GPS
GLONASS
GALILEO
BEIDOU
6: Context sensitive help
81

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gr50Gm30

Table of Contents