Outgoing data stream wizard: Configure NMEA data stream
Setting Descriptions
The table below describes the settings that can be configured on the Configure NMEA data stream page.
Setting
Description
Activate or deactivate the NMEA message check boxes that are to be output.
Message
A detailed description of each NMEA message is contained in Appendix B: NMEA Messages.
Select the data rate for the NMEA messages.
Rate
The selected NMEA messages will be sent out immediately at the selected rate.
The position update rate of a high rate (>1 Hz ) NMEA stream depends on:
•
•
•
Select positioning mode "Network RTK" in order to have updated positions in a high rate NMEA stream
also without e.g. having a high rate incoming data stream.
If different rates are configured for an NMEA stream and an incoming real-time stream, the rate of the
NMEA stream will be restricted to the rate of the incoming real-time corrections. This applies to
positioning modes "Reference Station" and "Monitoring" of the incoming data stream.
Select positioning mode "Network RTK" in order to have updated positions in a high rate NMEA stream
also without e.g. having a high rate incoming data stream.
Press
to go back to the previous wizard step. Press
Press
to cancel and return to GNSS management: Outgoing data stream.
Related Topics
Incoming data stream wizard: Configure real time in data stream
Outgoing data stream wizard: Configure BINEX data stream
Background Information
BINEX (Binary Exchange Format) is an exchange format for GNSS data defined by UNAVCO. You can find more information about
BINEX at http://binex.unavco.org. The configuration wizard includes a check box table which enables and disables individual BINEX
messages.
Setting Descriptions
The table below describes the settings that can be configured on the Configure BINEX data stream page.
Setting
Description
the data rate of an incoming correction data stream,
the data rate of an outgoing data stream,
the logging rate.
to continue to the next wizard step.
6: Context sensitive help
97