Leica GR30 Online Help Manual page 61

SD card status
The SD card status (icon) and the available space on the SD card MB(%) are shown.
GR25/50:
External USB drive status
The USB drive status (icon) and the available space on the USB drive MB(%) are shown.
Data stream status
The data stream status is shown with an icon and the number of currently active incoming data streams.
Raw data logging status
The raw data logging status is shown with an icon and the number of currently active logging sessions.
36
source.
SD card is inserted. The free space on the SD card is greater than 20%.
The free space on the SD card is below 20%.
Recommended user action: Activate the Smart clean-up or the automatic file
delete for each logging session.
The SD card is full. Data logging is stopped.
Recommended user action: Immediately activate the Smart clean-up or the
automatic file delete for each logging session.
External USB drive is detected. The free space on the USB drive is greater than
20%.
The free space on the USB drive is below 20%.
Recommended user action: Exchange the external USB drive.
The external USB drive is full. Data logging is continued until the SD card is full.
OR
The external USB drive is configured to be used but currently not detected.
Recommended user action: Immediately exchange the external USB drive or
detach and reattach the USB drive.
The external USB drive is not available on GR10/30 & GM10/30 receivers.
One or more data streams are configured and active. Data is being streamed.
Indicates that the data streams are active but no data is streamed.
Recommended user action: Check that satellites are tracked and a navigated
position is available. Check that the correct reference position is entered.
Active logging sessions are configured on the receiver and data is being logged.
Active logging sessions are configured on the receiver but Smart clean-up is
deleting data from all or some of the configured logging sessions.
Recommended user action: Check the remaining space on the SD card and
delete old data if necessary.
Active logging sessions are configured but
•
The SD card is full
or