Related Topics - Leica GR30 Online Help Manual

Step Description
Connect the receiver to the internet via a mobile internet connection in. Read the How to set up a mobile
1
internet connection guide for further information.
Go to Receiver Setup / General. In the Priority list move Mobile internet to the top of the list. The Ethernet
2
interface must be the 2nd entry in the priority list.
3
Press Save changes.
Check the event log and Status / Network connections to make sure the mobile internet connection has
4
been established.
Go to Receiver Setup / Residential gateway and activate Enable.
5
Select Mobile internet for WAN interface and Ethernet for LAN interface.
6
7
Press Save changes.
Connect a laptop to the receiver using a crossed Ethernet cable.
8
Some Ethernet adapters do not need a crossed Ethernet cable for a direct Ethernet connection. In this case,
a regular Ethernet cable can be used.
On the laptop Reconfigure the LAN adapter to use
9
static IP address: 192.168.0.4
Subnet mask: 255.255.255.0
Gateway: 192.168.0.3
DNS server: 192.168.0.3
Open a browser and type in 192.168.0.3. This will open the receiver's web interface in the browser.
10
Use the web server port as configured on the receiver. This port must be open in the APN profile of your
mobile internet service provider. The IP address must be extended by this port number if it is not standard
port 80, e.g. 192.168.0.3:50000.
Check that the laptop has internet access.
11

Related topics

Receiver setup: Residential gateway
Network connections: General
220