Met3, Met3A, Met4A Default Communication Settings; Vaisala Ptu300 Default Communication Settings; Vaisala Wxt520 Default Communication Settings; Related Topics - Leica GR30 Online Help Manual

The following default settings are used for communication between the Meteo device and receiver. They
cannot be edited.

Met3, Met3A, Met4A default communication settings

Communication setting
Port name
Baud rate
Parity
Data bits
Stop bit
Flow control

Vaisala PTU300 default communication settings

Communication setting
Port name
Baud rate
Parity
Data bits
Stop bit
Flow control

Vaisala WXT520 default communication settings

Communication setting
Port name
Baud rate
Parity
Data bits
Stop bit
Flow control
Press to go back to the previous wizard step. Press
Press to cancel and return to GNSS management: Incoming data streams.

Related Topics

MET RINEX Observational Types

Incoming data stream wizard: Configure Tilt

Background Information

Tilt devices (such as the Leica NIVEL210) are used for measuring inclinations. The data from the tilt device is logged together with the
GPS raw observations into MDB files. When logging RINEX files, the tilt data is written into a special auxiliary file.
No tilt data is logged unless a logging session is configured in GNSS management: Logging sessions and
the incoming data stream is active.
Default setting
Serial Port (P1).
9600
Even
8
1
No handshake. The handshake used between the receiver and the tilt device.
Default setting
Serial Port (P1).
4800
Even
7
1
No handshake. The handshake used between the receiver and the tilt device.
Default setting
Serial Port (P1).
19200
None
8
1
No handshake. The handshake used between the receiver and the tilt device.
to continue to the next wizard step.
6: Context sensitive help
107