Related Topics; Software: Overview - Leica GR30 Online Help Manual

•
GM10/30: Leica GNSS Spider v4.3 or later must be installed.
The version requirement applies to active instrument connections to configure the instrument by Leica GNSS
Spider. It does not apply to passive connections for data streaming only.
GNSS Spider Features
•
Simultaneous configuration and communication with one or many instruments.
•
Monitoring and messaging on instrument key parameters such as power voltage level, data storage availability, instruments
internal temperature or events logged on the receiver.
•
Visualisation of satellite tracking status.
•
Transfer raw data automatically from the instrument to a central data storage.
•
Perform RINEX conversion manually or automatically at different decimation rates and file lengths.
•
FTP push archived data to multiple locations.
•
Perform automatic quality control of archived RINEX data.
•
Manage a whole network of reference stations.
•
Supply single base or network RTK corrections to many users using a variety of communication methods incl. e.g. Ntrip.
•
Protect and manage access to RTK correction services using the Spider Business Center advanced user access
management.

Related topics

Keyboard
Web Interface: Overview
GNSS Spider / Remote Access

Software: Overview

All receivers use the same software concept.
Software type
GR/GM firmware
(GRxx_x.xx.xxx.fw)
(GMxx_x.xx.xxx.fw)
Language software
(REF_LANG.sxx)
12
Description
The receivers firmware is called RefWorx.
This important system software covers the basic functions of the instrument.
The onboard Web interface is integrated into the firmware and cannot be deleted. The
English language is integrated into the firmware and cannot be deleted.
The firmware can also be installed as a zipped file. The receiver will automatically unzip the
file before the installation.
For an automatic upload and installation of the firmware, the original file name as released
by Leica Geosystems must not be changed.
Various languages are available for the web server. Language software is also referred to as
system language.
English is the default language and cannot be deleted. Many different language files can be
loaded onto the SD card but only one language is chosen at a time as active language.
During a firmware upgrade the receiver reverts to English and all
language files are deleted. After the upgrade load the new
language version as needed.